LP4 to SATA 15pin Power cable
Ideal for small form factor desktop computers or servers that use Serial ATA Hard Drives
Connecting a Serial ATA Hard Drive to a standard internal Molex power supply connector – SATA (15-pin) to 4-pin Molex (LP4)
Appears to be around 16 or 18 ga. More than capable of handling inrush and constant current needed to run any PC accessory you'd see in a PC like a drive or tape.
The SATA end of the cable will only get +5 & +12 volts, SATA is supposed to have +3.3 volts, too, but the 4 pin connector does not have that. Lots of drives, etc. don't need +3.3 volts, like the CD/DVD/Blu-ray drive I will be using this for. Check the label on the drive to see if t needs 3.3
Note:
1. Small parts, please keep them away from children.
2. Please confirm whether it is the product you need before payment.
3. Please allow ±0-2cm difference due to manual measurement.(1 inch=2.54cm)
4. The flaws of the product in the picture are caused by reflections during shooting, the picture may not reflect the actual color of the item, subject to the actual product.
Please make sure you do not mind before you bid. Thank you!
Hot Tags: lp4 to sata 15pin power cable, China lp4 to sata 15pin power cable manufacturers, suppliers, factory, PCIE 6 Pin To 6 Pin & 6+2 Pin Cable, Dual LP4 To 6 Pin PCIe Power Cable Adapter, Double Pcie 6 2 Pin Half made Cable, DVI To DVI Monitor Adapter Cable, Desktop Computer Motherboard 24PIN To 14pin Power Cord Can Be Customized, VGA Y Cable Splitter With DMS 59 Connector Cable
